11 ways to protect yourself from DIY disasters
From USNews 5/57/14
It looks so easy, and the idea of saving hundreds, or maybe even thousands, of dollars is enticing. Surely you can repair those cracks in the wall, right? Or caulk around the bathtub. Or install a new toilet. Or change a light fixture. Or, emboldened by the seeming ease of repairs on home renovation TV shows, tear down a wall in your house.
Maybe you can handle all these do-it-yourself projects – but, then again, maybe you can’t.
“The road to the hardware store is paved with good intentions,” says David Pekel, president and CEO of Pekel Construction in Milwaukee and a master certified remodeler. He is often greeted at his office on Monday by frantic calls from homeowners who failed in their DIY weekend projects.
There are many projects that virtually any homeowner can accomplish, but others should be left to those with experience. Either way, it’s important to plan and understand a project before you launch into it.
Just know this: “It takes twice as long as you think it’s going to and generally costs twice as much,” Pekel says.
~In my experience it always takes longer, but not usually twice as much since I put a lot of planning into my projects beforehand~
Kelly Whalen and her husband thought that redoing the carpet, painting the paneling and ripping out some built-ins in the outdated family room of their 1970s home near Philadelphia would be an easy project.
But once they got started, they discovered asbestos tile under the carpet, which required removing the tile. That, in turn, damaged the paneling and an unknown layer of paneling underneath. They ended up gutting the room, adding new insulation, putting up new drywall and adding some wiring. A project that looked simple at first glance ended up taking six months to finish.
“The moral of the story is never think paint and new flooring will fix a room in an aging house,” says Whalen, who shared the details of her project in several posts on TheCentsibleLife.com. “Be prepared for a full gut job.”
Even professionals run into unexpected problems once they open walls, including ductwork or plumbing they didn’t realize was there and substandard work done by previous renovators. If you’ve ever watched “Love It or List It” on HGTV – a show where homeowners are advised on whether to renovate or sell their homes – you know that every one of those home improvement projects runs into snags that mean extra costs and more time. And those are teams of professionals doing the work.
Andy Prescott, who publishes the blog artofbeingcheap.com, does whatever repairs he can on his rental house and his own house. Plumbing is the one exception. Doing his own plumbing does not save money, and he learned this the hard way.
He once replaced the flushing mechanism on a rental house toilet and thought he’d done a great job. But he didn’t attach the hose tightly enough, and a leak ruined the downstairs carpet. That cost $1,000 to replace.
The next time he replaced a flushing mechanism, at his own house, he made sure the hose was tightly attached. But the toilet still leaked. He ended up taking the toilet apart and redoing the job four times, but he couldn’t stop the leak. “I finally gave up and called the plumber,” he says. “Not only did it cost me $150, but my family didn’t have water in our house for two days because we had to turn the water off to stop the toilet from leaking. No more plumbing for me. I stick with only the most simple repairs now.”
Here are 11 tips for avoiding your own DIY disasters.
Measure twice, cut once. There is a reason this proverb has been around for decades. If you cut your crown molding, tile or paneling too short, you can’t go back and make it longer.
Beware of plumbing projects. Most people can change the insides of a toilet, but problems can still arise, as Prescott discovered. If you have just one bathroom, be prepared to stay overnight elsewhere if something goes wrong. Make sure you turn off the water before you start any plumbing project.
Leave electrical projects to the professionals. If you know what you’re doing, you can change a light fixture. But replacing a light fixture with a ceiling fan involves more than just changing the fixture. Other electrical projects are even more complicated. If you do give it a shot, turn off the breaker before you touch anything.
Look for instructions online. You can find a YouTube video or detailed instructions for any project. But if that’s all the information you have on a project that you’ve never done before, beware. A video on building a deck from someone in Florida may not tell you what you need to get the deck to withstand 80 inches of snow, and a video from Minnesota on building a deck may not have the instructions you need to ensure your deck can survive a hurricane.
Take a class at Home Depot. Nearly every week, Home Depot stores nationwide offer free classes on everything from replacing a faucet to tiling a room. Be mindful that you need to register ahead of time to participate in these workshops.
Ask questions at the hardware store. Most hardware stores, and even some big-box stores, have experts on staff who can answer questions about home projects. If you’re replacing specific parts, bring along the parts if you can rather than trying to remember what they look like.
Use the right tools. You can rent or borrow some tools if you don’t own them yourself. Hint: If you’re going to assemble a lot of Ikea furniture, invest $20 in an electric screwdriver.
Know which work requires a permit. Some cities are stricter than others about permits, and only licensed contractors can obtain permits for some work. Doing major renovations without a permit could cause problems when you sell your home. Some cities require presale inspections, which can result in fines and the need for retroactive permits. That can mean redoing the job to city specifications.
Know what you can and can’t do yourself. “If you have to go to YouTube to learn something, you probably don’t know what you’re doing,” Pekel says. Homeowners often “don’t know what they don’t know.” If you mess up a painting project, you can always redo it. But if you take down a load-bearing wall and bring the second floor down with it, you’ve created a very expensive problem. With DIY projects, being cautious is typically the way to go.
Consider what your time is worth. If you earn $100 an hour and replacing a faucet takes you three hours, you would probably save money by hiring a plumber.
Be prepared to live with the results. That includes both the quality of work and the time your house will be in disarray. Can you install crown molding well enough to be happy with the results? Or will it forever bug you that it’s not exactly straight? That goes for more complex projects, too. If you gut the kitchen and end up taking six months to redo it, can you live without a kitchen that long?